Filling The Reservoir - Transcend 365 CPAP Manual Del Usuario

Transcend 365 miniCPAP Auto Quick Guide
Caution: Do not attempt to use the Transcend 365 miniCPAP Auto while in Drying mode.
The device will not provide the prescribed therapy pressure while in Drying mode.
The Transcend 365 miniCPAP Auto Humidifier
The Transcend 365 miniCPAP Auto is the only continuous positive airway pressure (CPAP)
device licensed to use advanced, built-in Capillary Force Vaporization™ (CFV)
humidification technology. CFV instantaneously combines humidified vapor with the
airstream on inhalation for warm, moist, comfortable airflow. This unique humidifier
utilizes a wick to draw distilled water up to the heating element, which then delivers warm
vapor upon inhalation. This specialized method of delivering humidification requires less
water, significantly reducing the size of the humidifier.
Caution! Use distilled water only. The use of distilled water is required for
proper function of the heated humidifier. Failure to use distilled water will damage
the humidifier and require repair or replacement. Alternatively, water may be filtered with
the Transcend Portable Water Filter for use with your Transcend 365 miniCPAP humidifier.
The ZeroWater™ Portable Filter Replacement Cartridge can be purchased directly from
your Transcend dealer, or at most major retailers.

Filling the Reservoir

To remove the reservoir from the CPAP, first disconnect the power source to your
1.
CPAP, then set the device on a flat, stable surface and secure the reservoir with one
hand while you lift and remove the CPAP with your other hand. The pieces are
Page 19
Push and hold the Up and
Down buttons to enter
Drying Mode.