Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
pro.Bose.com
NOTE: When using the RMS215 or RMS218 subwoofer with other Bose
RoomMatch
Array Module loudspeakers, thread the
®
®
temporary handles (which are included with each RoomMatch full-range array module) into each RMSFLY side-plate upper center hole
to aid in aligning subwoofer modules with array frames or other modules. The temporary handles may also be used to aid in lifting/
moving the RMS215 subwoofer, but should NOT be used to lift or move the RMS218 subwoofer. Remove the handles after positioning
the subwoofer, before final tightening of bolts and elevating the array.
For additional information regarding the design and installation of RoomMatch arrays, please refer to the pro.Bose.com website to
download the document RoomMatch Array Design and Installation Guide, or use the Bose contact information in the back of this guide.
Figure 4. RMS215 Side Plate Labels with Working Load Limits
Figure 5. RMS215 Side Plate Labels with Working Load Limits
English
Installation and Safety Guidelines
Page 7
Publicidad
