Window Requirements; Prepare The Air Conditioner - GE AER05 Manual Del Propietario E Instrucciones De Instalación

WINDOW REQUIREMENTS

1
• These instructions are for a standard
double-hung window. You will need to
modify them for other types of windows.
• The air conditioner can be installed
without the accordion panels if needed
to fit in a narrow window. See the
window opening dimensions.
• All supporting parts must be secured
to firm wood, masonry or metal.
• The electrical outlet must be within
reach of the power cord.
24-1/2" to 34-1/4"
(With accordion panels)
17" min.
(Without accordion panels)
STORM WINDOW REQUIREMENTS
2
A storm window frame will not allow the
air conditioner to tilt toward the outside,
and will keep it from draining properly.
To adjust for this, attach a piece of wood
to the stool.
WOOD PIECES–
WIDTH: 2"
LENGTH: Long enough to fit inside the
window frame.
THICKNESS: To determine the thickness,
place a piece of wood on the stool to
make it 1/2" higher than the top of the
storm window frame.
Attach securely with nails or screws
provided by the installer.
1/2" higher
than frame
Storm
window
frame
Installation Instructions
12" min.
Wood
Stool

PREPARE THE AIR CONDITIONER

3
Install the top mounting rail with 2 Type A
A
screws from the outside of the case.
Top mounting rail
Bottom mounting rail
B
Slide the left and right accordion panels
into the top and bottom mounting rails.
Attach the accordion panels to the case
C
using 2 Type A screws on each side.
Accordion
panel
Type A
screws
8
Top mounting rail
BACK
Bottom mounting rail