MSW KP-10 Manual De Instrucciones página 4

Nr. Teil Beschreibung
24 Stift
25 Hebelstecker
26 Hebel
27 Hebelgriff
28 Zylinder
29 Aufgeschraubte Hűlle
30 Buchse
31 Schraube
32 Mutterschraube
33 Feder
34 Verriegelungsring
35 Ring
36 Nylonring
37 Dichtung
38 Verriegelungsring
39 Kolbenstange
40 Kopfschutzdeckel der Kolbenstange
41 Servomotorring
42 Schraubdeckel
43 O-ring Dichtung
44 Ventilblock
45 Anschluβmutterschraube
46 Schraube
47 Festes Backen
48 Servomotor
49 Dichtungsring
50 Ring
51 Schutz
52 Mobiles Backen
53 Stift
54 Verriegelungsring
55 Verriegelung
6
U S E R M A N U A L
TECHNICAL DATA
Parameter
description
Product name
Model
Maximum load [t]
Actuator piston
stroke [mm]
Minimum height of
the actuator piston
rod position [mm]
Maximum height of
the actuator piston
rod position [mm]
Weight [kg]
1. GENERAL DESCRIPTION
The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed
and manufactured in accordance with strict technical
guidelines,
components. Additionally, it is produced in compliance
with the most stringent quality standards.
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THIS
To increase the product life of the device and to ensure
a trouble-free operation, use it in accordance with this user
manual and regularly perform the maintenance tasks. The
technical data and specifications in this user manual are
up to date. The manufacturer reserves the right to make
changes associated with quality improvement.
Legend
The product satisfies the relevant safety
standards.
Read instructions before use.
WARNING! or CAUTION! or REMEMBER!
Applicable to the given situation (general
warning sign).
Wear protective goggles.
Wear protective gloves.
Wear foot protection.
ATTENTION! Danger of hand crushing.
PLEASE NOTE! Drawings in this manual are for
illustration purposes only and in some details it may
differ from the actual machine.
The original operation manual is in German. Other
language versions are translations from German.
Rev. 24.07.2018 Rev. 24.07.2018
2. USAGE SAFETY
Parameter value
Porta Hydraulic Jack
Whenever "device" or "product" are used in the warnings
MSW-KP-10 MSW-KP-4
and instructions, it shall mean Porta Hydraulic Jack.
10 4
2.1 Safety at the workplace
135 120 a)
355 270
b)
490 390
c)
29 17
d)
e)
using state-of-the-art technologies and
2.2. PERSONAL SAFETY
a)
USER MANUAL.
b)
c)
d)
e)
f)
g)
h)
2.3 SAFE DEVICE USE
a)
ATTENTION! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in serious injury or even
death.
Make sure the workplace is orderly and well lit.
A messy or poorly lit workplace may lead to accidents.
Try to anticipate what may happen, observe what is
going on and use common sense when working with
the device.
Do not use the device in an explosion hazard zone, for
example in the presence of flammable liquids, gasses
or dust. The device generates sparks which may ignite
dust or fumes.
Upon discovering damage or irregular operation,
immediately switch the device off and report it to
a supervisor without delay.
If there are any doubts as to the correct operation
of the device, contact the manufacturer's support
service.
Only the manufacturer's service point may repair the
device. Do not attempt any repairs independently!
REMEMBER! When using the device, protect
children and other bystanders.
Do not use the device when tired, ill or under the
influence of alcohol, narcotics or medication which
can significantly impair the ability to operate the
device.
The machine may be operated by physically fit persons
who are able to handle the machine and properly
trained and who reviewed this operating manual and
received training in occupational health and safety
The machine is not designed to be handled by persons
(including children) with limited mental and sensory
functions or persons lacking relevant experience and/
or knowledge unless they are supervised by a person
responsible for their safety or they have received
instructions on how to operate the machine.
When working with the device, use common sense
and stay alert. Temporary loss of concentration whilst
using the device may lead to serious injuries.
Use personal protection equipment as required for
working with the device, specified in section 1 (Legend).
The use of correct, approved personal protection
equipment reduces the risk of suffering an injury.
Do not overestimate your abilities. When using the
device keep your balance and remain stable at all
times. This will ensure better control over the device
in unexpected situations.
Do not wear loose clothing or jewellery. Keep hair,
clothes and gloves away from moving parts. Loose
clothing, jewellery or long hair may get caught in
moving parts.
Exercise special care when working with the device
lever; the recoil occurrence is possible.
Do not overload the device. Use appropriate tools for
the given task. A correctly selected device will perform
the task for which it was designed better and in a safer
manner.
7