Maxon 296075-01 Manual De Instrucciones página 9

LIFT CORPORATION Sht. 9 of 56 DSG#
Keep dirt, water and other contaminants from entering the hydraulic system.
Before opening the hydraulic fl uid reservoir fi ller cap, drain plug and hydrau-
lic lines, clean up contaminants that can get in the openings. Also, protect the
openings from accidental contamination.
11. Remove and discard high pressure line
from pump assembly (FIG. 9-1).
12. Loosen the elbow on pump port 'A'
(FIG. 9-2). Next, rotate elbow 180°
on pump port 'A' (FIG 9-2A).
© MAXON Lift Corp. 2017
CAUTION
REMOVING HIGH PRESSURE LINE
FIG. 9-2A
M-15-13
Rev. C Date: 12/13/17
FIG. 9-1
ROTATING ELBOW ON
PUMP PLATE
FIG. 9-2