Field Of View; Maintenance - SATA 05225 Manual Del Uso

Termómetro infrarrojo
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 53
Note:
1 )Shiny or polished surfaces can give inaccurate readings. To compensate for this,
cover the surface with masking tape or flat colored paint. When the tape or paint
reaches the same temperature as the target underneath, measure the temperature
of the item
2)The thermometer cannot measure through transparent surfaces such as glass or
plastic. It will measure the surface temperature instead
3)Steam, dust, smoke, and other optical obstructions can prevent accurate
measurement

FIELD OF VIEW:

The farther the thermometer is from the target, the larger the target area will be. This relationship
between distance and target size is normally expressed as the distance to spot, or D:S ratio. At a
distance of 12cm, the " target " spot would be 2cm in diameter.The thermometer will display the
average temperature across the target area.
Spot Center
6cm@36cm

MAINTENANCE:

To clean the lens:Blow off loose particles using clean compressed air.Gently brush remaining debris
away with a moist cotton cloth .
To clean the case:Wipe the case with damp, soft cloth.
Note:
Do not use solvent or abrasive to clean the lens or the case, and do not submerge the
thermometer under water
14
05225
4cm@24cm
中文
EN
DE
Distance
2cm@12cm
RU
KO
JA
PT
ES

Publicidad

Tabla de contenido
loading

Tabla de contenido