Weston 86-0701-W Manual De Instrucciones página 4

GEAR MOVEMENT
Fast gear shaft
With the handle attached,
turn clockwise to raise the
plunger, or counterclockwise
to lower the plunger.
FAST GEAR SHAFT IS BEST FOR ASSEMBLY AND DISASSEMBLY.
NOT IDEAL FOR USE WITH STUFFING.
Fast gear shaft should only be used to raise
the plunger out of the canister or lower the
plunger until it gets to the food load. It should
NOT be used for stuffing.
ASSEMBLY
PLUNGER ASSEMBLY
1. Slide the plunger
seal onto the plunger
(FIGURE 1).
2. Assemble the pressure
release valve kit onto
the plunger. From the
top of the plunger,
place the washer
onto the valve hole,
then insert the screw
through the washer
and into the valve hole.
From the underside of
the plunger, place the
spring onto the end of
the screw, then place
the valve cap onto the
end of the screw and
twist to secure.
3. Screw the plunger bolt
onto the plunger shaft
(FIGURE 2).
4. Place the assembled
plunger onto the end
of the plunger shaft
(FIGURE 3).
4
.
Plunger
Shaft
FIGURE 3
Plunger
Slow gear shaft
With the handle attached, turn
clockwise to raise the plunger,
or counterclockwise to lower
the plunger.
Plunger
Seal
Plunger
Valve Hole
Handle
FIGURE 1
FIGURE 2
Plunger
Shaft
Pressure
Release
Valve Kit
Screw &
Washer
Spring
Valve
Cap
Plunger
Bolt