Descargar Imprimir esta página

Trix 701 Serie Manual De Instrucciones página 9

Ocultar thumbs Ver también para 701 Serie:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 20
• Information about DCC Operation:
The setting done at the factory does not permit operation
with opposite polarity DC power in the braking block. If you
want this characteristic, you must do without conventional
DC power operation (CV29 / Bit 2 = 0).
The operating instructions for your central unit (example:
Mobile Station) will give you exact procedures for setting the
different parameters. With many systems the values set at the
factory can be read in the programming mode.
Safety Information
• The mechanism for the platform is not to be disassembled.
The warranty for the car becomes invalid if the protective
paint coating is destroyed.
• This locomotive is only to be used with the operating
system it is designed for.
• This locomotive must not be supplied with power simulta-
neously by more than one power source.
• Please make note of the safety information in the instruc-
tions for your operating system.
• The feeder track must be equipped to prevent inter-
ference with radio and television reception, when the
locomotive is to be run in conventional operation. The
611 655 interference suppression set is to be used for this
purpose. The interference suppression set is not suitable
for digital operation.
• WARNING! This product contains magnets. Swallowing
more than one magnet may cause death in certain circum-
stances. If necessary, see a doctor immediately.
No warranty or damage claims shall be accepted in those cases where
parts neither manufactured nor approved by Trix have been installed in
Trix products or where Trix products have been converted in such a way
that the non-Trix parts or the conversion were causal to the defects and
/ or damage arising. The burden of presenting evidence and the burden
of proof thereof, that the installation of non-Trix parts or the conversion
in or of Trix products was not causal to the defects and / or damage
arising, is borne by the person and/or company responsible for the
installation and / or conversion, or by the customer.
9

Publicidad

loading

Este manual también es adecuado para:

22210