Fora P20 Manual Del Propietário página 21

► Averaging Measurement Mode
Always apply the pressure cuff before turning on the monitor.
Step 1
Press and hold
the averaging mode. Press
from 1 to 4) whose test reading will be stored in memory and press
confirm. Then the cuff will begin to inflate automatically.
Step 2
After the first measurement is completed, the monitor will start counting down
before the second measurement begins. The number on the right represents
the remaining countdown between each measurement. The monitor will take
three (3) measurements consecutively with intervals of 20 seconds.
Step 3
After taking three measurements, the results are averaged to produce
the blood pressure measurement. Press
for three seconds. The monitor will turn on and enter
to select user "
to turn off the monitor.
" (numbers
to
21