Stop Using - Selecta TEMPLOW YC Manual Instrucciones

the equipment while maintaining the medical refrigerator. Otherwise, your health will be
endangered.
7.1 Defrost
After the product has been working for a period of time, its internal surface will be frosted, which
will affect the cooling effect and increase the power consumption. It is recommended that defrosting
should be performed when the frost layer is too thick.
6) Cut off the power, open the door, and transfer the items to a cool place.
7) Use a defrost scoop to gently remove the surface area cream (Also allow the temperature inside
the product to naturally rise, melt the frost)
8) In order to speed up the defrosting process, flat bottom containers with less than 50°C hot
water can be placed in the product.
9) Then use a dry cloth to wipe off any remaining ice water. Return items to the medical
refrigerator.
10) Connect to power and turn on the product.
Warning: Do not use sharp metal appliances during defrosting to avoid damage to the product.
Storage conditions: Ambient temperature: ‐40 to +55 , relative humidity: 10% to 90%.
7.2 Stop Using
If the product needs to be stopped for a long time, the power should be cut off, clean the product
according to 7.3 method, and sealed after opening and drying. Before using it again, use a dry cloth
to dry the water around the door.
7.3 Maintenance
Do not place heavy objects on the top of the product to avoid deformation of the product.
At regular intervals, the product is cleaned and maintained once. (For safety reasons, the product
must be unplugged before scrubbing.) Wipe the inner and outer surfaces of the product with a soft,
damp cloth.
When the dirt is heavy, wipe it with a neutral detergent for washing utensils, then wipe the water
with a soft cloth.
Once this product is activated, it is best to use it continuously.
Note: Do not spray water directly on the cabinet, so as to avoid degradation of electrical components
and rust of metal parts. Do not use hot water and corrosive cleaners or organic solvents to clean the
cabinet.
Do not violently shake or collide during transportation or use. Prevent from rain.
Storage and transportation conditions: Ambient temperature: ‐40 to +55 , relative humidity: 10% to
90%.
7.4 Disposal
WARNING: If the equipment is left unused in an unsupervised area for extended periods of time,