Troubleshooting And Maintenance Service - Selecta TEMPLOW YC Manual Instrucciones

make sure that the child does not get close to the cabinet and that the door cannot be completely
closed. Disposal of cabinets should be performed by appropriate personnel to prevent accidents such
as asphyxiation.
8. Troubleshooting and Maintenance Service
Any product has the possibility of failure. Please observe the operation of the product in time during
use. If there is any abnormality, please check the following table. If you can't solve the trouble, you
should notify supplier in time, so as not to cause losses to you. The product has a service life of 10
years.
Trouble
The unit doesn't work
Compressor doesn't work
Temperature does not reach the set value
Big noise
Glass window surface condensation
The following conditions are not faults:
1.Slight sound of water flowing from the refrigerant in the pipe.
2.When the compressor is started or stopped, the switch parts will make a slight percussion sound.
For the first use of the product when starting up, there will be a long working time, which is normal.
3.In rainy and humid seasons, the surface of the cooler temperature of the product may be frosted,
wiped with a dry cloth.
4.When the product is working, the compressor is hot.
Reason and solutions
Does power socket have electricity?
Is the plug inserted or lose?
Is the power fuse disconnected?
Is the power supply voltage too low or too high?
Is temperature setting correct?
Is the temperature inside the cabinet too low?
Is the door open or closed too often?
Are too many items stored at one time?
Is the ambient temperature too high?
Is the product placed on flat floor?
Does the cabinet hit the wall?
During rainy and humid seasons, the window may
condense, which is normal. Wipe it off with a dry
cloth.