Trouble Shooting; Specifications - Tennant 609937 Manual Del Operador

TROUBLE SHOOTING

PROBLEM
Motor does not run.
Motor overheated.
Dryer vibrates excessively or
turns erratically or makes unusu-
al sounds.

SPECIFICATIONS

MODEL
LENGTH
WIDTH
HEIGHT
WEIGHT
BLOWER WHEEL
AIR MOVEMENT
CHASSIS
MOTOR
POWER CORD LENGTH
DECIBEL RATING AT OPERATOR'S EAR INDOORS.
FRONT HEIGHT ADJUSTMENT
Tennant 200 (11–01)
CAUSE
Machine unplugged or switch not
turned on.
Faulty switch.
Building circuit breaker tripped.
Faulty power cord.
Faulty wiring.
Blower wheel jammed.
Motor overheated due to intake
screens or exhaust snout blocked.
Faulty capacitor.
Intake screens or exhaust snout is
blocked.
Serve jolt has caused blower wheeler
shaft or motor mount to be out of align-
ment.
Accumulation of soil on blower wheel.
200
584 mm (23 in)
381 mm (15 in)
508 mm (20 in)
13.6Kg (30lbs)
241 mm (9.5 in) x 241 mm (9.5 in)
Low-56.6 m
High-70 m
Polyethylene
230V/240V, 3A, 0.6kW, 900–1400 rpm
4.6 m (15 ft)
68dB(A)
38 mm–127 mm (1.5 in–5 in)
SOLUTION
Plug machine in or turn switch to de-
sired speed.
Contact Service Center.
Reset breaker and change to different
circuit.
Contact Service Center.
Contact Service Center.
Remove obstruction.
Turn off dryer, allow motor to cool and
remove blockage.
Contact Service Center.
Turn dryer off, remove blockage and
allow motor to cool.
Contact Service Center.
Clean blower wheel.
3
/min.
3
/min.
OPERATION
5