PNI IP60 Manual De Usuario página 9

• check the camera with a different SIM card (no active PIN)
• check the APN in the APN Mode menu. Manually enter the correct
APN and save the settings.
5. Disconnect the LAN cable between the camera and the local network
router and restart the camera. Open the application and check the
condition of the camera in about 5 minutes. If everything is OK, the
camera will be Online and you can access it remotely, from another
network.
Configure recordings on the micro SD card
1. Install a micro SD card up to 128Gb (not included) in the camera. The
card installation location is displayed on page 4.
1. Launch the mobile application, click on the icon
you want to configure. Note: the status of the camera must be Online.
2. From the settings menu, select Action with alarm.
3. Activate the option Alarm SD REC.
4. Return to the main menu and select the SD Card setting option to check
9
next to the camera
User manual