Care And Maintenance - allen+roth LG-2023-L Manual De Instrucciones

ASSEMBLY INSTRUCTIONS
1. To connect two chairs together, carefully place
the chair frame (A) upside down on a soft surface
such as carpet.
2. Attach one side of chair frame (A) with the
opposite side on another chair (sold separately)
with C-clips (AA). Flip assembly over and install
seat cushion (B), back cushion (C) and
throw pillow (D).
Hardware Used
AA C-Clip

CARE AND MAINTENANCE

• Paint on this furniture might peel if it is not handled properly. Handle with care.
• Clean frame with a solution of warm water and mild soap. Dry completely. Do not use bleach
or solvents. Use a fine automotive wax to maintain gloss on non-textured finishes.
• The finish on furniture is formulated and baked on to make it highly resistant to repellents and
lotions. However, to avoid discoloration, clean the frame as soon as possible after exposure.
• For best results, clean weave regularly with mild detergent and warm water. Cleaning will help
prevent mildew by washing out dirt particles that may become trapped. Shake out excess
moisture after rinsing and allow to dry thoroughly before storing.
• Spot wash fabric by sponging briskly with a soapy solution in lukewarm water (do not exceed 100 F).
Thoroughly rinse with clean water to remove soap. Allow to air dry completely before storing.
1
2
A
x 2
3
Lowes.com/allenandroth
A
AA