INSTALLATION INSTRUCTIONS
Optional Step 4 : Replace hardware
4. Open the drawer, remove the preassembled screws,
change the optional nickel pull and relock the screws.
CARE AND MAINTENANCE
• Dust the vanity regularly with a soft, non-lint producing cloth or household dusting product.
• You can clean the vanity with a gentle, non-abrasive household cleaner.
• Make sure to dry the wood immediately with a soft cloth or towel.
• The engineered stone top surface is very sensitive to acid-alkaline liquids and materials,
such as toothpaste, hand soap, cologne, perfume, nail polish remover, hair color and perm products,
shampoo, drain and toilet bowl cleaner, alcohol, lemon juice, medications, etc. Please try to avoid
contact of these acid-alkaline liquids and materials with the vanity top surface when possible. If these
liquids or materials spill onto the surface, wipe it off immediately. Always clean the surface and keep
it dry after use.
• Tips for using touch-up pen (AA): For scratches, stroke in direction of scratch. Rub off excess
colorant promptly with a soft cloth.
4
5