2.5 Set SDA
Press 【 Func 】key into setting SDA mode under 12/24 hours format mode.
Press 【Up】or【Down】key to select and set SDA mode, SDA On/Off mode and SDA date mode.
Press 【Vol+】or【Vol-】shortly to select SDA1, SDA2, SDA3, SDA4, SDA5 and SDA6 under setting SDA
mode.
Press【Vol+】or【Vol-】shortly to select ON/OFF under setting SDA On/Off mode.
Press 【Vol+】or 【Vol-】key to increase date or decrease date by one day. Press and hold【Vol+】or 【
Vol-】
key to increase or decrease date by ten days in a fast mode.
Press【Func】key shortly into setting wake up time mode.
2.6 Set Dimmer Timer
Press 【Up】or【Down】key to select and set DT switch mode, DT start mode and DT end mode.
Press 【Vol+】or 【Vol-】key shortly to select DT ON/OFF during setting DT switch mode.
Press 【Vol+】 or 【Vol-】key shortly to increase or decrease time by one minute and hold them to increase
or decrease by ten minutes in a fast mode under set DT START and DT End modes.
Press 【Func】key shortly into setting PPRL.
2.7 Set Pre-Programmable Radio Station Listening (Abbreviation:PPRL)
Press【Up】or 【Down】key to select and set PPRL switch mode,PPRL start Time mode,PPRL End Time
mode or radio station frequency mode.
Press【Vol+】or【Vol-】key shortly to select PPRL On or Off under DT switch setting mode.
Press【Vol+】or【Vol-】key shortly, minute value increase or decrease value one, press and hold them to
increase or decrease time by ten minutes in a fast mode under setting PPRL Start and PPRL End modes.
Press【Vol+】or【Vol-】key shortly, frequency increase 0.1MHz or decrease 0.1MHz.Press and hold 【
Vol+】 or 【Vol-】 key to increase 10MHz or decrease 10MHz continually when setting PPRL station frequency.
Press【Func】key to enter into setting 12/24 hours mode.
2.8 Set 12/24 Hours Format
Press 【 【 【 【 Func】 】 】 】 key into 12/24 hours setting mode under setting PPRL mode.
Press【Vol+】or 【Vol-】key to select 12 or 24 hours format alternatively.
Press【Func】key into RESET mode.
2.9 Set RESET Mode
Press 【Vol+】or 【Vol-】key into RESET mode.
Press【Func】key shortly to exit setting mode.
2.10 Alarm Setting
Press【AL1】key to enter into Alarm 1 mode under standby condition.
Press【AL1】key to toggle alarm setting mode, alarm ring output setting mode, sleep time setting mode or
setting LAMP wake-up time.
Press【Up】or【Down】key to select setting content.
When the unit stays on alarm setting mode:
Press【Up】or【Down】key to increase or decrease time by one minute.
Press and hold【 Up】or【 Down】key to advance or move back by ten minutes in a fast mode.
When the unit stays on alarm ring output setting mode:
,Press【Up】or【Down】key shortly and select to turn off alarm, BUZZ,RADIO and natural wake-up modes.
When the unit stays on setting alarm wake-up mode:
Press 【Up】or【Down】key shortly and select to wake up everyday, wake up workdays, wake up f weekend
and wake up one day repeatly.
When the unit stays on setting sleep timer and LAMP wake-up time modes:
Press【Up】or【Down】key shortly, time increase value one or decrease value one.
Press and hold【Up】or【Down】key, time increase value ten or decrease value ten.
Note: The way of setting for AL2 is the same as AL1.
English Instruction Manual
6