Led Light - SOUNDMASTER Highline BT1308 Manual De Instrucciones

3.7 How to Use SLEEP Function
When the unit stays on standby mode, using sleep function can terminate LAMP.
When the unit turns on, using sleep function can terminate unit and LAMP.
Press【Sleep】key to turn on sleep function and the defaulted time is 120 minutes.
Press【Sleep】key to adjust sleep time value by five minutes.
Pressing and holding【Sleep】key can cancel sleep function.
When the sleep time is 5 minutes, press【Sleep】key once again to cancel sleep function.
3.8 How to Control Backlight
Press 【 Dimmer】 key shortly to turn on or off Dimmer function. When it's powered up, backlight will gets darken
if no any keys have been pressed.
3.9 Alarm Wake-Up
Press【SNOOZE】key to enter into sleeping mode and the alarm mark will be flashing on LCD display. It will
wake up alarm again after presetting sleeping time.
When unit turns on sleeping mode and stays on standby mode, press 【AL1】to cancel Alarm1 and press
【AL2】to cancel Alarm2.
The unit will stop waking up alarm if no any keys have been pressed after waking up alarm within ten
minutes.
3.10 SDA Wake-Up
When SDA presetting date wakes up press any keys to terminate it. If no keys have been pressed while SDA
wakes up, it will be waking up at the beginning of next hour and terminating after 22 hours.

3.11 LED Light

Press 【LAMP】 to turn on or turn off LED light. Press 【light+】 to increase lightness and press 【light-】
to decrease lightness, press and hold them to increase or decrease lightness rapidly.
3.12 EU Directive on Eco-Design (ErP)
When device work with a media source by Bluetooth, it's should be automatic power off and change to
standby mode if no signal from sound source for play back over 15 minutes.
The function not active for Radio...
English Instruction Manual
8