Delay Start - Kenmore 587.1520 Serie Manual De Uso

Operating Instructions Operating Instructions
Operating Instructions Operating Instructions Operating Instructions
Sahara Dry
(available on select models)
When the SAHARA DRY option is selected, the
dishwasher increases the temperature of the final
rinse and extends drying time by approximately
twenty minutes. The SAHARA DRY option can be
used with all cycles except CHINA CRYSTAL,
ECO WASH AND RINSE ONLY. For best drying
performance, select Hi-Temp Wash and/or
sanitize. This will increase the temperture during
the wash cycle to improve drying.
The energy required to use the SAHARA DRY
option costs pennies per cycle. You may choose
not to select the SAHARA DRY option; however
you may have items in your dish load that will not
be completely dry at the end of the cycle.
Child Lock Controls
To prevent children from accidently changing the
dishwasher cycle or starting the dishwasher, lock
the dishwasher controls by pressing and releasing
the DELAY START pad (some models) or the AIR
DRY pad (some models) for 3 seconds. An
indicator light on the lock graphic pad will illuminate
when the controls are locked and no new
selections can be made until the lock is released.
To unlock the controls, press the DELAY START
pad or AIR DRY pad until the indicator light goes
out.
(continued) (continued) (continued)
(continued) (continued)

Delay Start

The DELAY START option allows you to
automatically delay starting your dishwasher from
1-24 hours.
On models with 1-24 hour delay, press the DELAY
START pad until the desired delay time shows in
the STATUS window. A light will come on
indicating the delay start hours and will remain on
until cycle starts.
To cancel the DELAY START option and begin the
cycle before the delay period is over, press the
START/CANCEL pad.
To Cancel a Cycle
You can cancel a cycle anytime during the cycle.
Press START/CANCEL pad and the dishwasher
will start a 90 second drain. At the end of the drain,
select the desired cycle.
When an option is selected, the light above the
pad will come on and remain on until end of cycle.
To turn off the option, press the pad a second
time. The light above the pad will turn off.
10