Publicidad
sensor Inklino para ángulo de inclinación
con dos puntos de conmutación programables
B1N360V-Q20L60-2UP6X3-H1151/3GD
instrucciones de montaje / descripción
2 / 5
Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ more@turck.com ñ www.turck.com
Programming of switching points via teach-adapter
TX1-Q20L60
Switch-on and off points are freely selectable over the
entire inclination range of 360°.
They can be taught in clockwise or counter clockwise
direction.
The sensor must be installed in vertical position. Move
the inclinometer in the wanted start position before you
program the switchpoints. For more details on program-
ming, please see next page.
When selecting the programming mode with default
operating range of 180°, only the switch-on point has to
be adjusted.
Publicidad
