Turbo Mode - Trust 18524 Guía De Instalación Rápida

Gamepad – USER'S MANUAL
Installation PC
A. Home button
1
B. Controller status Leds (4x)
C. USB connection (for charging)
D. Turbo button
E. Select button
F. Clear button
G. Start button
H. Status LED
I. USB dongle
J. USB cable (for charging)
- Charge the gamepad by connecting it to the pc by using the USB cable 'J'.
2
- Turn on the PC.
3
- Connect the USB receiver to your PC.
- Press the 'home' button to power on the gamepad.
4
- The Controller status LED light will start blinking when connecting.
- The Controller status LED light will burn constantly when it's connected.
Led number indicates the controller number on the PS3.
You can charge and use the gamepad simultaneously.
Press and hold "Turbo" button, press a fire button = turbo fire on.

Turbo Mode:

Press and hold "Clear" button, press the same fire button again = turbo fire off.
Configuration PC
- Go to the Game controller settings of the gamepad.
5
- Open the Properties.
- Test all functions.
Make sure your game supports this kind of game controller. Read the instruction manual of the game for the
best settings.
2