Kitchenaid Toaster Use - Kitchen Aid KMT233 Instrucciones

Before using your toaster, check the Extra-
Wide Slots and remove any packing or
printed material that might have fallen inside
during shipping or handling. Do not probe
inside the toaster with a metal object.
You may see light smoke the first time you
use the toaster. This is normal, and the
smoke will soon disappear.
TO USE:
1. Shorten cord, if necessary, by wrapping
cord under the base. The toaster's feet
are tall enough to allow the cord to exit
from under any side of the toaster.
K
ITCHENAID
Models KMT233 and KMT433
®
T
OASTER
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong
outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions
can result in death, fire, or
electrical shock.
2. Plug into a grounded 3-prong outlet.
The special function buttons and the
digital toast display on the temperature
knob will light up. If no buttons are
pressed for 10 minutes, the digital
display will turn off.
3. Insert bread or other food to be toasted
in slot.
4. For even toasting on model KMT233,
toast only one bread type and thickness
at a time. For 4-slot model KMT433,
with Dual Independent Controls, if
toasting of two different breads is
desired, be sure to toast only one bread
type in each pair of slots.
The centering racks will adjust slot width
automatically to hold food upright for
even toasting.
5. The toaster will automatically sense the
food (by weight), lower it into the toaster,
and begin toasting.
NOTE: If the weight of your food item is
not enough to activate the sensor
(25 g [1 oz]), press TOAST/CANCEL to
lower the food.
U
SE
7