Kalorik PSGR 2000 RI Manual Del Usuario página 5

If the batteries leak, remove them, clean the contacts of
❑
the appliance and wash your hands.
If you do not use the appliance for a long time, remove the
❑
batteries so that they do not leak.
(*)
Competent qualified electrician: after-sales department of the
producer or importer or any person who is qualified, approved
and competent to perform this kind of repairs in order to avoid all
danger. In case of need you should return the appliance to this
electrician.
BEFORE USE
Each mill runs on 4 x AA batteries.
Place the On/Off switch on the Off position.
To open the unit and access the battery compartment, turn the mill upside down and
turn the plastic cap counterclockwise to unlock it. Once unlocked, simply lift the battery
compartment out from the unit.
Insert the batteries in such a way that the polarity of each battery is respected, and
matches with the symbol indicated on the battery cradle.
Check that the switch is on the Off position.
To close the battery housing, put the battery cradle back into the appliance, and
replace the cap turning it clockwise until it gets locked firmly.
To fill with pepper or salt:
1. With the pepper mill standing on its base, hold the black plastic part located
around the edges of the grinding head. Hold the part firmly and turn it
counterclockwise to uncover the salt/pepper chamber's opening.
2. Fill the transparent refill chamber with salt or pepper.
3. Close the grinding head by returning it back into its initial position, lock in place
by turning the black plastic part counter-clockwise, until the opening is
completely closed.
5 PSGR 2000 RI