Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
> English
Maintenance recommendations
To open the container for cleaning, unscrew the lid.
The motor and float switch assembly can be pulled out for removal of hair or debris. If necessary, remove
the filter and wash it.
To remove or replace the power cartridge
Lift tab and rotate the two fins in a counter clockwise direction and lift out.
To reinstall, first make sure that the seal is properly located. Coat the seal with a light film of vegetable
oil or mineral oil, then align the two cams on either side of the power cartridge with the two slots in
the outer housing. Press down and twist in a clockwise rotation. To ensure that the power cartridge is
properly located, twist fins in a counter clock-wise direction without lifting tab. Cartridge should stay in
place.
Seal
Reinstall
Remove
Lift tab
Waste handling/material recycling
At the products end of life, please dispose of the product according to applicable
law. Where applicable, please disassemble the product and recycle the parts
material.
6
Original instructions
Publicidad
Tabla de contenido
