Description Of Symbols; General Safety - Silverline 267213 Traducción Del Manual Original

GB

Description of Symbols

The rating plate on your tool may show symbols. These represent important
information about the product or instructions on its use.
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
Double insulated for additional protection
Caution!
Conforms to relevant legislation and safety standards
Environmental Protection
Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. Check
with your local authority or retailer for recycling advice
Specification
Voltage: ................................................230V~ 50Hz
Power: ..................................................500W
No load speed: .....................................10,000min
Cutting diameter: ..................................300mm
Power cord length: ...............................2.0m
Ingress protection: ................................IP20
Protection class: ...................................
Sound pressure: ...................................96dB(A)
Sound power: .......................................69dB(A)
Weight: .................................................2.8kg
Sound and vibration information:
Sound Pressure L : ..............................84.5dB(A)
PA
Uncertainty K: .......................................3dB (A)
Sound Power L : .................................94.1dB(A
WA
Uncertainty K: .......................................1.94dB(A)
Weighted vibration ah(main handle): ....15.213m/s
ah (auxiliary handle): ............................12.027m/s
Uncertainty K: .......................................1.5m/s
The sound intensity level for the operator may exceed 85dB(A) and
sound protection measures are necessary.
As part of our ongoing product development, specifications of
Silverline products may alter without notice.
4
V
~
A
n
o
Hz
W, kW
/min or min

General Safety

WARNING Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious
injury.
WARNING: This appliance is not intended for use by persons (including
children) with reduced, physical or mental capabilities or lack of experience
or knowledge unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
Children must be supervised to ensure that they do not play with the
appliance.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.
Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite
b) Do not operate power tools in explosive atmospheres, such as in the
c) Keep children and bystanders away while operating a power tool.
Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any
-1
b) Avoid body contact with earthed or grounded surfaces, such as pipes,
c) Do not expose power tools to rain or wet conditions. Water entering a
d) Do not abuse the cord. Never use the cord for carrying, pulling or
e) When operating a power tool outdoors, use an extension cord suitable
f) If operating a power tool in a damp location is unavoidable, use a
Personal safety
2
a) Stay alert, watch what you are doing and use common sense when
2
2
b) Use personal protective equipment. Always wear eye protection.
c) Prevent unintentional starting. Ensure the switch is in the off-position
Original Instructions
Volts
Alternating current
Ampere
No load speed
Hertz
Watt, kilowatt
-1 (revolutions or reciprocation) per minute
accidents.
presence of flammable liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
Distractions can cause you to lose control.
way. Do not use any adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will reduce risk of electric
shock.
radiators, ranges and refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
power tool will increase the risk of electric shock.
unplugging the power tool. Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords increase the risk of
electric shock.
for outdoor use. Use of a cord suitable for outdoor use reduces the risk
of electric shock.
residual current device (RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
operating a power tool. Do not use a power tool while you are tired
or under the influence of drugs, alcohol or medication. A moment of
inattention while operating power tools may result in serious personal
injury.
Protective equipment such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate conditions will reduce
personal injuries.
before connecting to power source and/or battery pack, picking up or
carrying the tool. Carrying power tools with your finger on the switch or