Troubleshooting
1. If there is no display after pressing
POSSIBLE CAUSE
Batteries exhausted.
Batteries incorrectly installed or
absent.
2. If the heart rate is higher or lower than user's average:
POSSIBLE CAUSE
Movement during measurement.
Measurement taken just after
exercise.
3. If the result is higher or lower than user's average measurement:
POSSIBLE CAUSE
May not be in correct position while
measuring.
Blood pressure naturally varies
from time to time.
4. If the cuff inflates again while measuring:
POSSIBLE CAUSE
Cuff is not fastened.
If the user's blood pressure is higher than the pressure the device has
inflated to, the device will automatically increase its pressure and start to
inflate again. Stay relaxed and wait for the measurement.
:
WHAT TO DO
Replace the batteries.
Check that the batteries are correctly
installed.
WHAT TO DO
Repeat measurement.
Rest at least 30 minutes before
repeating measurement.
WHAT TO DO
Read instructions thoroughly and
repeat the test again.
Keep in mind for next measurement.
WHAT TO DO
Fasten the cuff again.
19