For Your Safety - Mr. Heater MH400PT Instrucciones De Uso Y Manual Del Usuario

FOR YOUR SAFETY!

- Shut off gas to the device.
- DO NOT try to light appliance.
- Extinguish any open flame.
- Check the device for leaks using soapy water.
- DO NOT attempt to relight the device until all leaks are repaired and there is no gas smell.
Leak Test:
1) Close torch adjusting valve (turn fully clockwise).
3) Test all connections for possible gas leaks using leak test solution.
•
4) If a leak occurs at:
•
CAUTION:
DO NOT operate if any leaks are present. A leak may create a fire hazard.
DO NOT smoke around or expose supply tank(s) to open flames or sparks.
DO NOT apply heat or flame to tank to check for leaks. Excess heat may cause the
supply tank to rupture, possibly causing personal injury.
Lighting and Operating Instructions:
NOTE: The hose assembly is supplied with an excess flow control valve. Opening
1) Make sure torch adjusting valve is closed.
3) With torch nozzle pointed away from any flammable material, open torch
USE: When using tool, do not direct flame directly into wind.
Mr. Heater | Propane Torch
IF YOU SMELL GAS:
assembly may be required. Contact Mr. Heater for the proper
replacement parts.
counterclockwise.
connection. Repeat if necessary.
of a turn or until you can hear gas escaping.
th
clockwise
5