Amoena CONTACT Instrucciones De Uso página 17

DE
• Only Amoena Soft Cleanser allows you to achieve optimum adhesion. Other cleaning
products can reduce the adhesive strength.
• Small clumps that form on the adhesive surface should not be removed. Do not use
any other cleaning agents such as abrasive powder or implements such as scissors or
tweezers. Clean the adhesive surface with the Amoena Soft Cleanser.
• The special brush should be replaced after 12 months at the latest.
Cleaning the Adhesive Surface
1. Add three drops of the Amoena Soft Cleanser to the dry adhesive surface and then
moisten the special brush with lukewarm water. See Diagram 3 Contact page 3
2. Using only the special brush, clean the adhesive surface well for approx. 3 minutes,
applying pressure and using circular movements. See Diagram 4 Contact page 3
3. Then rinse with plenty of lukewarm water.
4. Leave to air dry or dry with a hair dryer on a moderate setting.
ADAPT BREAST FORMS
Art. No. Article
326 Adapt Air Xtra Light 2SN
327 Adapt Air Light 2SN
328 Adapt Air Xtra Light 1SN
329 Adapt Air Light 1SN
376 Adapt Light 3A
All Adapt Air products are supplied with a pump.
General Instructions for Use
Amoena Adapt Air are breast forms with an integrated air chamber which
can be individually adjusted to fit the chest wall and the body's natural silhouette.
IFU_BreastForms_Premium_ID1285_011220.indd 17 IFU_BreastForms_Premium_ID1285_011220.indd 17
BALANCE ADAPT SHAPERS
Art. No. Article
233 Balance Adapt Air MD
234 Balance Adapt Air SV
ENG
17
02.12.2020 09:08:52 02.12.2020 09:08:52