Grundig HS 5523 Manual Del Usuario página 12

OPERATION
Settings
Your appliance has the following settings:
Temperature level/blower level
– 0: Off
– 1: Gentle air flow and moderate temperature for
gently drying and styling
– 2: Strong air current, high temperature for quick
drying
Cool shot
F
– d : Interrupts heating and provides a cool air flow
Changing the styling attachments
1
Detach the attached styling attachment
pressing on the catch (on the back of the appli­
ance) B and turning the hot air brush slightly to
the right.
2 Place another styling attachment on so that the recess
and the catch B (on the back of the appliance) are
in line and turn slightly to the left until it clicks.
Operation
Check if the mains voltage on the type plate (on the
handle of the device) corresponds to your local mains
supply.
INFORMATION
Environmental note
This product has been made from high­quality parts
and materials which can be re­used and recycled.
Therefore, do not throw the product away with normal
household waste at the end of its life. Take it
to a collection point for recycling electrical
and electronic devices. This is indicated by
this symbol on the product, in the operating
manual and on the packaging.
Please find out about collection points operated by
your local authority.
Help protect the environment by recycling used prod­
ucts.
12
ENGLISH
___________________________________________________________
C
A by
______________________________________________________
1
Thoroughly towel dry your hair after washing.
2 Plug the D power cord into the wall socket.
3 Turn on the appliance with the switch
the required temperature level/blower level.
4
If necessary, interrupt heating by pressing and
holding down the G
Note
Cool Shot interrupts heating and provides a cool
7
air flow. This allows you to fix your hairstyle better
and more lastingly.
5
After use, switch off the appliance with the
switch and pull the plug of the mains
cable D out of the socket.
Note
Never wind the mains cable around the appliance,
7
because this can cause damage.
Please check the appliance and the cable regularly
for visible damage.
Cleaning and care
Pull the plug out before cleaning.
Never submerge the appliance in water.
Use a soft, dry cloth to clean the housing. Clean the
air inlet grille G occasionally with a soft brush to
remove hairs and dust.
Technical data
This product fulfils the European directives
2004/108/EG, 2006/95/EG,
2009/125/EG and 2011/65/EU.
Power supply
230 ­ 240 V ~ , 50 Hz
Power
1000 ­ 1100 W
Technical and design modifications reserved.
C and set
button (Cool Shot).
C