NGS Technology Helium Manual Del Usuario página 11

• During playback of mp3 fi les, press ID3 on the remote control to show
more information of the current file.
To select a playback mode:
•
Press PLAY MODE repeatedly on the remote control to select a playback mode
Repeat one (
Repeat album* (
Repeat all (
Random (
Cancel playback mode (no icon)
•
* Repeat album is only available for MP3 discs.
The selected repeat or random mode icon will show on the display.
•
To program the playback:
The program playback mode lets you program a total of 40 tracks in any desired order. You can also
program the same track/file to play several times within a program sequence.
1. In CD mode, press
2.
While playback is stopped, press MEMORY/CLOCK.
PROG and PR01 shows on the display. PROG stands for program mode whereas PR01
stands for the fi rst program location.
Press or to select the track for the fi rst program location.
3.
Press MEMORY/CLOCK to store the selected track into the program location.
4.
Repeat steps 3 and 4 to program more tracks. Up to 40 tracks can be programmed.
5.
Press to start playback of the programmed tracks. Playback will stop alter all programmed
6.
tracks are played.
To play back the programmed tracks again, press.
7.
To cancel the programmed sequence from the memory, press
8.
or open the disc compartment door.
PROG disappears from the display
Tuner
To access the Tuner mode:
Press FUNCTION repeatedly until Tuner mode is selected.
•
• The TUNER icon lights on the display when tuner mode is selected.
To change tuner band:
• Press DELETE/BAND in tuner mode to switch between FM and MW band.
To perform a station search:
•
Press
distant stations that are not strong enough to be recognized by the automatic
searching.
)
ALBUM )
(ALL )
)
to stop any disc playback.
or to adjust the frequency. Use this method to tune to weak or
English
twice in the programme mode,
11