Putting Into Operation - bredent BF 2 Folleto De Instrucciones

5. Milling unit
5.7
5.6
5.9
5.12
5.19
5.20
5.22

6. Putting into operation

6.1 Check if voltage/power supply data are in accordance with the data on the typeplate (6.21).
6.2 Plug power plug into the socket.
6.3 Switch power switch on/off (5.17) to "on". Please note: First turn rotary knob (5.19) to "zero" to adjust
the speed  Risk of injury!
6.4 Fix the model on the model platform and lock with the locking lever (5.16)) in accordance with the
direction of insertion.
6.5 Fix the model platform with the locking screw (5.12) on the milling table as required.
6.6 Turn the lever (5.7) to the right side to open the milling spindle, insert the desired bur and close the spindle
by turning the lever to the left side.  Tools may only be exchanged when the motor is switched off!
6.7 Open the locking lever (5.9) and adjust the milling table with the knob for height adjustment (5.10) to
ensure correct working height and close the locking lever.
8
5.4
5.5
5.1
5.3
5.2
5.10
6.21
5.13
5.8
5.11
5.17
5.23
5.18
5.21
5.15
5.14
(5.1) Locking screw to lock the horizontal movement
(5.2) Locking lever for the rotation movement
(5.3) Lever with display for drillings
(5.4) Micrometer screw with depth stop
(5.5) Locking screw to lock the vertical movement of
the milling spindle
(5.5) Locking screw and locating device for the
milling spindle
(5.7) Clamping lever
(5.8) Cable bushing
(5.9) Locking lever to fix the milling table
(5.10) Knob for height adjustment of the milling table
(5.11) Locking screw with height stop
(5.12) Hole to accept the locking screw for the model
platform
(5.13) Dirt collecting tray
(5.14) Acceptance for model or milling base
(5.15) Locking screw
(5.16) Locking lever for tilting and rotation movement
(5.17) Power switch on/off
(5.18) Right hand rotation/left-hand rotation; the
milling spindle can be operated either in the
left-hand or right-hand rotation mode
(5.19) Rotary knob for continuously adjustable speed
within a range of 0-30000 min
(5.20) Light switch
(5.21) Typeplate
(5.22) Socket for power plug
(5.23) 3-pole socket
5.16
-1