Product Familiarisation - Silverline 265148 Manual Del Usuario

265148
Storage
• When you have finished using the tool, clean it completely.
• Be careful not to hit or cut the fuel tank, or fuel lines, when it is placed on
the ground.
• Do not let the tool fall, or it may be damaged and become unsafe.
• Store the tool away from direct sunlight.
• Ensure that fuel and oil is stored in a safe place, away from heat, direct
sunlight, any source of ignition, and out of reach of children.
Whenever the machine is out of use for an extended period
of time, proceed as follows:
• Empty the fuel tank completely.
• Protect all metal engine parts from corrosion by coating them with oil.
• Remove the spark plug, put a few drops of oil into the cylinder and then
pull the recoil starter 2 to 3 times in order to distribute the oil evenly.
Replace the spark plug.
Never leave the tool running unattended
• Always wait until the machine has come to a complete stop before
leaving it.
• Never leave the machine unattended when parts are still hot.
• Never leave machine unattended where children, may have access to it.
THIS PRODUCT PRODUCES POISONOUS EXHAUST FUMES
AS SOON AS THE ENGINE IS RUNNING. THESE GASES MAY
BE COLOURLESS AND ODOURLESS. TO REDUCE THE RISK
OF SERIOUS OR FATAL INJURY, NEVER RUN THE MACHINE
INDOORS, OR IN POORLY VENTILATED AREAS. ENSURE
PROPER VENTILATION WHEN WORKING IN TRENCHES OR
OTHER CONFINED SPACES.
Petrol Vacuum Blower

Product Familiarisation

1 Vacuum tubes
2 Front handle
3 Main handle
4 Throttle
5 Primer bulb
6 Selection lever
7 Debris exhaust
8 Vacuum bag
9 Ignition switch
10 Recoil starter
11 Fuel filler cap
12 Choke lever
www.silverlinetools.com
5