Description Of Symbols - Silverline 372673 Traducción Del Manual Original

GB

Description of Symbols

The rating plate on your tool may show symbols. These represent important
information about the product or instructions on its use.
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction Manual
DO NOT use with compressed gas cylinders!
Toxic fumes or gases!
Caution!
Conforms to relevant legislation and safety standards
Technical Abbreviations Key
psi
Ø
dB(A)
4
Pounds per square inch
Diameter
Decibel sound level (A weighted)
Original Instructions
Specification
Maximum operating pressure: ....................3 – 4Bar (43 – 58psi)
Air Consumption (CFM): ......................................................4CFM
Cup capacity: .....................................................................850ml
Feed type: ........................................................................ Suction
Inlet connection: ...................................................................... ¼"
Outlet nozzle: ....................................................................2.8mm
Weight: .............................................................................. 0.61kg
Recommended abrasives: .................F220 (0.06) – F40 (0.8mm)
Material flow rate: .........................................................200g/min
As part of our ongoing product development,
specifications of Silverline products may alter without notice.
Noise and vibration information:
Level of sound pressure according to
Machinery directive 2006/42/EC:
Sound Pressure L : ..........................................................92dB(A)
PA
Sound Power L : ...........................................................103dB(A)
WA
Uncertainty K: .........................................................................3dB
Vibration emission value a : ..............................................2.5m/s
h
Uncertainty K: ...................................................................1.5m/s
The sound intensity level for the operator may exceed 85dB(A)
and sound protection measures are necessary.
WARNING: Always wear ear protection where the sound level exceeds
85dB(A) and limit the time of exposure if necessary. If sound levels are
uncomfortable, even with ear protection, stop using the tool immediately
and check the ear protection is correctly fitted and provides the correct level
of sound attenuation for the level of sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense of
touch, numbness, tingling and reduced ability to grip. Long term exposure
can lead to a chronic condition. If necessary, limit the length of time
exposed to vibration and use anti-vibration gloves. Do not operate the tool
with hands below a normal comfortable temperature, as vibration will have
a greater effect. Use the figures provided in the specification relating to
vibration to calculate the duration and frequency of operating the tool.
Sound and vibration levels in the specification are determined according
to EN60745 or similar international standards. The figures represent
normal use for the tool in normal working conditions. A poorly maintained,
incorrectly assembled, or misused tool, may produce increased levels of
noise and vibration. www.osha.europa.eu provides information on sound
and vibration levels in the workplace that may be useful to domestic users
who use tools for long periods of time.
Aluminium Oxide Grit
2
2