Hama TH-10 Instrucciones De Uso página 6

7. Alarm function in the case of bacteria
Press the button (3) to activate the mould risk
alarm . As soon as humidity exceeds the set value
for the mould alarm, there is a risk of mould forming.
If the temperature is between 25°C and 40°C and
humidity is greater than 70%, the ashing symbol
(8) for bacteria is shown on the
display and the mould alarm
Press the button (3) to deactivate the alarm.
When you deactivate the mould alarm, only the
ashing symbol
on the display until the measured humidity falls back
below the mould limit value entered.
8. Important information concerning health
Excessive indoor humidity promotes the growth of
undesirable organisms. Being in a room with mould
infestation can damage people's immune systems, lead
to respiratory diseases and allergies, and is related to
infections. Very dry indoor air can dry the skin, irritate
the throat and paranasal sinuses, and increase the
risk of infections. In a dry climate, or if heating in the
home dries out the air, a humidi er can be used to
increase relative humidity.
Active heating and ventilation promotes a comfortable
and healthy indoor climate.
(12) is triggered.
(8) is shown
9. Care and Maintenance
Only clean this product with a slightly damp, lint-free
cloth and do not use aggressive cleaning agents.
Make sure that water does not get into the product.
10. Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and provides
no warranty for damage resulting from improper
installation/mounting, improper use of the product or
from failure to observe the operating instructions and/
or safety notes.
11. Technical Data
Weather station
Power supply
Temperature measuring
range
Humidity measuring
range
2 x AAA batteries
Indoors: 0°C–50°C
20% - 90%
5