Installation Considerations - Eaton ECOSENSE LDCM-PL-120-277-010V-GR Instrucciones De Instalación

Installation Instructions - LDCM - Plenum Rated: 0-10V, 450W/120V, 1000W/277V

Installation Considerations

Operating Voltage/Power Consumption
Operating Temperature
Weight
Dimensions
Read and understand the installation instructions before attempting to install or use the dimmer control module.
• •
Only use dimmer control module with voltage for which it is rated. Do not exceed the specified voltage and current input.
• •
Do not use dimmer control module if the housing, or power cable are damaged.
• •
Dimmer control module have line voltage risk of shock and no user serviceable parts. Do not attempt to open.
• •
Do not hot swap. Ensure that power is off before connecting or disconnecting fixtures in the series.
• •
Ensure that main power supply is off before installing or wiring a dimmer control module.
• •
The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire shall be
• •
destroyed.
Hazardous live parts shall not be accessible after installation, and it is the installer's responsibility to ensure that the
• •
installation/connections are in compliance with national and local electrical codes and regulations.
The wire connection method shall be determined by local electrical codes and regulations, typically using either wire nuts
• •
or screw terminal blocks.
Possibly hazardous optical radiation emitted from this product.
• •
This device may not cause harmful interference, and (2) this device must accept any interference received, including
• •
interference that may cause undesired operation.
4
EATON IL503004EN Installation Instructions
110VAC-120VAC, 450W (Maximum) 60Hz 277VAC, 1000W (Maximum) 60Hz
-4°F to 104°F ( -20°C to 40°C)
0.99 lbs / 0.45 kg
7" L x 3.4" W x 2" H
(178 mm x 87 mm x 50 mm)
WARNING