AEB 446 Manual Instructiones De Montaje página 8

- The Emulator 466 disconnects and simulates the injectors during GAS
operation on cars HONDA CIVIC 1.5 i cat. BI - INIETTORE.
- It avoids the check-engine pilot light coming on as it detects the injectors
being disconnected.
- It eliminates any malfunctioning of the car after transformation to GAS.
- It delays cutting off GASOLINE during the passage to GAS to avoid possible
backfiring.
WARNING: With this emulator you do not need to add any other relay in
order to stop injection. The gasoline wire coming from the switch has to
be insulated and not to be connected.
We advise you to fix the Emulator in a vertical position, away from
possible water infiltrations and excessive heat sources ( for example:
exhaust manifolds), so as to avoid to irreparably damage the Emulator.
To avoid bad workings of the Emulator we advise you to:
- pass the Emulator wires away from the high tension wire;
- make good connections. Please, pay attention that the best
connection you can do is a duly insulated welding.
Please advise the client that in event of a GAS electric system
breakdown, the Emulator automatically resets the original injectors
connection.
Do not absolutely open the Emulator box, especially when the engine is
running or the board panel is inserted. A.E.B. srl declines every
responsabilities for damages caused to things or person which
derive from the tampering of its own device provoked by
unauthorized persons.
Technical Specifications
General Direction
English
IS446 Rev.010697 - 0