Reelcraft H Serie Instrucciones De Operación

Operating Instructions
Series H Stainless Steel Hand Crank Hose Reels
Medium Pressure Model Numbers:
HS18000 M HS28000 M
HS18000 M-S HS28000 M-S
HS19000 M HS29000 M
HS19000 M-S HS29000 M-S
IMPORTANT
Read this manual carefully before installing, operating
or servicing this equipment.
HS18000
HS19000
A 19"
B 20"
C 15"
D 10"
E 12 1/2"
F 5 3/4"
G 17 3/4"
SAFETY
Personal injury and/or equipment damage may result if proper safety precautions are not observed.
• Ensure that reel is properly installed before connecting input and
output hoses.
• Bleed fluid/gas pressure from system before servicing reel.
• Before connecting reel to supply line, ensure that pressure does
not exceed maximum working pressure rating of reel.
• Remember, even low pressure is very dangerous and can cause
personal injury or death.
• Be aware of machinery and personnel in work area.
• If a leak occurs in the hose or reel, remove system pressure
immediately.
Reelcraft Industries, Inc. • 2842 E Business Hwy 30, Columbia City, IN 46725
Ph: 800-444-3134 / 260-248-8188 • Fax: 800-444-4587 / 260-248-2605
Customer Service: 855-634-9109 • reelcraft@reelcraft.com • www.reelcraft.com
HS29005 M
HS29005 M-S
Dimensions
HS28000
HS29005
HS29000
19" 18 7/8"
20" 14"
15" 10"
16" 16"
18 1/2" 18 1/2"
5 3/4" 5-3/4"
17 3/4" 15 3/16"
G
A
B
• A high tension spring assembly is contained within the reel.
Exercise extreme caution.
• Pull hose from reel by grasping the hose itself, not the control
valve.
• Ensure that reel, hose, and equipment being serviced are
properly grounded. Use an ohmmeter to check ground
continuity.
• If reel ceases to unwind or rewind, remove system pressure
immediately. Do not pull or jerk on hose!
C
F
E
D
Form# 830-696A Rev: 8/2018