Publicidad
Idiomas disponibles
Idiomas disponibles
management code. Please remember the management
code.
To reset electronic drawer safe back to the
default factory code:
1. Enter "*" and press "11".
2. Locate and press the red programming button on right
corner on the inside of the safe.
3. Press "#" to confi rm.
4. Both the stored personal user code and management
code will be reverted back to the original factory setting.
Low Battery Alert:
- Change the batteries immediately when the red "low bat-
tery" light turns on.
- Battery pack is located on the inside of the safe, behind the
electronic keypad underneath the protective lining.
- It is recommended that brand-new, name-brand batteries
be installed in this unit for maximum operating effi ciency. Be
sure to check expiration date on batteries.
Emergency Entry System for Lost/Misplaced Codes:
1. To open the safe when both management and personal
user code are lost/misplaced, insert manual override key
into the emergency lock on the front face of the drawer safe,
below the keypad.
2. Turn key clockwise to open the safe.
3. 4-AA batteries are required for operation.
*Warning: Never keep manual override keys inside the safe.
- 3 -
Publicidad
