Quick Salt E-360 Manual De Usuario página 45

3.1.2. Chemical balance of water
You should keep in mind that much of the effectiveness of your
depend on the pH of the water being within the proper range: between 7.2 and 7.6.
It is common that the pH tends to increase with the use of the salt chlorinator, so it should be
analyzed periodically and adjusted if necessary.
Another fundamental parameter is the concentration of free chlorine, which is a disinfectant that
we obtain thanks to the QUICKSALT
production of the equipment and the hours of operation. How you can make such an adjustment
is detailed in later sections.
The most important recommended chemical parameters are shown below. We suggest analyzing
them periodically, but especially and regularly, the values of free chlorine and pH.
Parameter
PH
FREE CHLORINE (mg/l)
COMBINED CHLORINE (mg/l)
ISOCIANURIC ACID (mg/l)
OZONE (vessel) (mg/l)
ALKALINITY (mg/l)
HARDNESS (mg/l)
Once your pool water has the right concentration of salt, and the main chemical parameters
within its recommended range, you can start your
The following section details how to configure and adjust it for optimal operation.
chlorinator. Its regulation will be carried out by adjusting the
Minimum Value
7,2
0,5
--
--
--
100
150
QUICKSALT
QUICKSALT chlorinator will
Maximum Value
7,6
2,5
0,6
<75
0
160
250
chlorinator.
MANUAL DE USUARIO
45