Main Screen; Settings Menu - Quick Salt E-360 Manual De Usuario

MANUAL DE USUARIO

4.3. Main Screen

It shows the status of the equipment, and its current production:
First line: Chlorine production in
the voltage at which it is operating.
Second line: Equipment status: "OK" will
be displayed in case the equipment is
working without any incidence. In the event
of an alarm or warning, you will be notified
in this area of the screen.

4.4. Settings Menu

By pressing the right button, you will access the configuration menu.
If you want to make a setting, first go to the screen where the parameter you want to change is
displayed. Press OK, place the cursor on the parameter to be modified, and press OK again. When
you see the value blinking, you can change it. Once set, press OK again to confirm.
4.4.1. Production
Allows you to regulate production of chlorine, between 0 and 100
useful to adjust the chlorine concentration of your pool, without having to decrease the hours of
filtration.
48
, and
%
Production
Cleaning(h):
Language:
Audible alarm
Model:
Exit
Prod: 100%
Status:
100%
2
ENG
OFF
35g/h
in 10 increments. This is
% %
17.0V
OK