Zenith ZP305MH Manual Del Propietário página 3

Brand Name Code Search:
Try this search option if the brand of your device is
listed in the table below.
1. Turn on the device you wish to program for use with
this remote.
2. In the "Table" section below, find the code(s) for
your device and brand.
3. Locate the Digit Number for your device and brand
from the table. Note: Blank cells in the table indicate
unavailable entries.
4. Point the remote at the device.
5. Press and hold the Device Button and then press and
hold the Digit Number.
6. When the device shuts off, (this may take several
minutes) release both buttons immediately. The code
will be saved and programming complete. a. If the
Power Indicator Light flashes twice and then shuts
off, the remote has searched all the codes and quit
the search process.
3