4
Pressing the " " and "
humidity.
5
When the water level is low, the control unit will display only 1 drop
of water and an accustic alarm will play for 30 seconds. You can turn
off the alarm by pressing any button on the control unit.
The indication of the indoor temperature is just for information. The
humidifier will control the humidifity, but will not control the tempera-
ture in your humidor.
5 Recalibrating hygrometer
Should you have reason to believe that the hygrometer requires recali-
bration
readjust
1
To decrease the humidity percentage turn the knob " " counter clock-
wise. With each click it will decrease 1%.
2
To increase the humidity percentage turn the knob " " clockwise. With
each click it will add 1%.
3
Turn on humidifier and wait 24h for stabilization.
4
Repeat former steps if needed.
Specifications
Factory pre-set
Humidifier Accuracy
Humidity target
70%
Operating current
78mA
" buttons quickly will display the Max/Min
the
hygrometer
+/-1%
Wall Outlet Power
100-240V/AC
© adorini - www.adorini.com
with
the
following
Measures Humidity
Reading
40%-90%, +/-3%
Humidifier Power import
5.5V/DC
steps:
Manually Adjust
Range
40%-90%
Size(L*W*H)
18,5cm*10,4cm*3,0cm
6