Metra Axxess GMOS-04 Instrucciones De Instalación página 5

Cut remote out from GMOS-04.
Connect interface side to
pin 85 on SPDT relay.
(Figure A)
Installing the GMOS-04
• With all connections completed to the aftermarket radio, plug the 24- and 12-pin
harnesses into the vehicles wiring harnesses.
• Reconnect the negative battery terminal.
• Cycle the key, by turning the ignition on for 30 seconds. Then off and on again
to test the radio.
GMOS-04
To Vehicle
12v remote from
GMOS-04
Blue/White
GMOS-04
To Radio
+12v Battery
Fused 5A
87
87a
85 86
30
5
SPDT
relay