General Safeguards; Cleaning The Laminator; Cleaning The Body - Q-Connect A3 Manual De Instrucciones

1 Inlet
2 Outlet
3 LED indicator (red when ON, blue when ready)
4 Power button (red when ON)
5 Roller release button
6 Electric plug
7. Slide switch (80mic, OFF, 100/125mic)

GeNeRAL SAfeGuARDS

Failure to comply with any of the following safety
precautions may result in serious injury, fire or
electrocution.
Keep out of the reach of children.
Unauthorised maintenance is not allowed.
Do not allow liquid to get into the machine.
Do not insert any foreign object or put your fingers or
hand inside.
This machine is a heat emitting, do not leave it
unattended during operation.
Allow enough space behind the laminator to ensure
free clearance of the laminated object and prevent
blockage.
OpeRATING INSTRucTIONS
1 Insert the electric plug (6) into the power socket
(7).
2 Turn on the laminator by sliding the switch (7) to
the corresponding pouch thickness which will
glow red.
3 The red LED indicator (3) will turn green when the
laminator is ready for lamination.
4 Prepare the item to be laminated. Insert the item in
between the laminating pouch and push it to the
sealed end of the pouch. WE RECOMMEND TO USE
Q-CONNECT LAMINATING POUCHES.
5 Insert the sealed end of the pouch straight into the
laminator through the inlet (1). Once the pouch
is engaged by the roller, it will be rolled into the
laminator automatically.
6 Remove the laminated item from the outlet (2).
7 After use, turn off the laminator by sliding the
switch (7) to position OFF.
ReMOvING jAMMeD LAMINATING
pOucheS
If the laminating pouch is jammed inside the
laminator during the laminating process, press the
roller release button (5) and pull the jammed pouch
out immediately. After the jammed pouch is re-
moved, release the roller release button and continue
with a fresh laminating pouch. If the jammed pouch
cannot be removed, turn off the laminator and report
to the dealer shop for assistance.

cLeANING The LAMINATOR

After laminating several documents, adhesive
material from the pouch may accumulate inside the
laminator. Please clean the laminator regularly as
follows:
1 Turn on the laminator until the ready LED (3)
glows.
2 Fold a sheet of fresh copying paper once at the
middle and insert with the folded end first through
the laminator. Repeat the same procedure for 3 - 5
times.

cLeANING The bODy

1 Unplug the laminator.
2 Wipe with a soft cloth and a general-purpose
household cleaner.
SpecIfIcATIONS
Max. Laminating width: 320mm.
Laminating speed: 300mm per min.
Max. Laminating Thickness: 0,4mm.
Pouch film Thickness: 80- 125 micron per side.
Jammed paper release: roller release button.
2 rollers.
Pre-heat time: 3 - 5 minutes.
Voltage: 220V-240V / 50 Hz.
Consumption power: 245W.
Current: 1,0 A.
Weight: 1,8 kg.
Dimensions: 440 x 135 x 66mm.
Body Material: ABS.
3
t