DJI SNAIL 2305 Guia Del Usuario página 9

ESC Configuration
Calibrate the throttle range and switch the motor
rotation direction using the remote controller.
1. Power on the remote controller and receiver.
Ensure a strong link between them. Push the
throttle stick all the way up. The motor will start a
double beep, single beep sequence.
2. Then the warning sound will alternate between a
quick single beep and a quick double beep. Pull
the throttle stick all the way down after hearing
a single beep to calibrate the throttle. Pull the
throttle stick all the way down after hearing
a double beep to reverse the motor rotation
direction. By rotating the desired motor quickly
in any direction, this motor's rotation direction will
be changed.
3. The warning sound becomes a chime when
completed.
4. Restart the ESC after reversing its rotation direction.
7