Tabla de contenido
Publicidad
PL
Rysunek produktu
1. Port micro USB do ładowania
2. Głośność -/poprzednia ścieżka
(długie naciśnięcie)
3. Wskaźnik LED
4. Przycisk wielofunkcyjny
5. Głośność +/następna ścieżka
(długie naciśnięcie)
6. Mikrofon (połączenia telefoniczne)
7. Sterowanie na kablu
8. Pasek za głowę
9. Wbudowana bateria
10. Zaczepy uszne
11. Mikrofon z funkcją ANC
12. Wkładki douszne
SR
Šematski prikaz paketa
1. Mikro USB ulaz za punjenje
2. Ton - / Prethodna numera
(dugo pritiskanje)
3. LED indikator
4. Multifunkcionalno dugme
5. Ton + / Sledeća numera
(dugo pritiskanje)
6. Mikrofon (telefonski pozivi)
7. In-line kontrola
8. Povez za glavu
9. Ugrađena baterija
10. Kukice za uši
11. ANC mikrofon
12. Jastučići za uši
RO
Diagramă pachet
1. Port de încărcare micro USB
2. Volum - / Piesa anterioară (apăsare lungă)
3. Indicator LED
4. Buton multifuncțional
5. Volum + / Piesa următoare (apăsare lungă)
6. Microfon (apeluri telefonice)
7. Control pe fir
8. Bandă pentru cap
9. Baterie inclusă
10. Agățători pentru urechi
11. Microfon ANC
12. Auriculare
SL
Slika izdelka
1. Priključek za polnjenje Micro USB
2. Glasnost –/prejšnja skladba
(dolg pritisk)
3. LED-indikator
4. Večfunkcijska tipka
5. Glasnost +/naslednja skladba
(dolg pritisk)
6. Mikrofon (telefonski klici)
7. Upravljanje v vrstici
8. Naglavni trak
9. Vgrajena baterija
10. Ušesni zanki
11. Mikrofon ANC
12. Ušesna čepka
EN
Package Contents
· 1 x TaoTronics Wireless ANC Earphones
· 1 x USB Charging Cable
· 6 x Ear Buds (two are already installed)
· 6 x Ear Hooks (two are already installed)
· 1 x User Guide
How to Use
1. Charging
1) Connect the charging port with any USB charging adapter or active computer
USB port.
2) Charging will start automatically with the LED indicator turning red.
3) The earphones are fully charged when the LED indicator turns blue.
Note:
· The LED indicator will ash red when the battery is low.
· Make sure the battery is fully charged before putting the earphones away for
storage.
· Charge the earphones at least once every 3 months when not using for a long
time.
2. Pairing
1) Make sure the earphones and your Bluetooth® device are next to each other
(within 3 feet / 1 meter).
2) Press and hold the Multifunction Button to bring the earphones into pairing
mode until you see the LED indicator ashing blue and red.
3) Activate Bluetooth® on your phone and search for nearby Bluetooth®
connections.
4) Find "TaoTronics TT-BH042" in the search results. Tap on the name to connect.
Once connected, the LED indicator will ash blue.
Note:
· The Bluetooth earphones can remember previously paired devices.
· If the earphones cannot pair with your Bluetooth® device, clear the pairing
history by pressing and holding the Volume + and Volume - buttons for 5
seconds until the LED Indicator turns purple with 2 beep sounds when the
earphones are on.
01
Publicidad
Tabla de contenido
