Remote Operation - BRONDI SD-10 Manual Del Usuario

end the call or repeat this step to record a new OGM2 again.
REMOTELY PLAYING INCOMING MESSAGES (ICM'S)
Call the answering machine from a separate line. During the OGM, enter your security code.
Press the "5" pad and the unit will playback the messages.
Press the "9" pad to stop playback. After Playback, all messages will still be saved for when you
return home.
To repeat the currently playing message, press the "4" pad. To skip backward to previous
messages, press "4" and then quickly press "4" again.
To skip forward to the next message, press the "6" pad.
RECORDING A MEMO
Call the answering machine from a separate line. During the OGM, enter your security code. Press
the "#" and then the "3" pad and after the long beep, record your memo.
Press the "9" pad when finished.
ERASING ONE MESSAGE
Call the answering machine from a separate line. During the OGM, enter your security code. Press
the "5" pad to play messages. To remotely erase the currently playing message, press the "0" pad.
ERASING ALL MESSAGES
Call the answering machine from a separate line. During the OGM, enter your security code and
press the "5" pad to play messages. To remotely erase all messages, press the "#" and then the "0"
pad.
This feature will allow you to call in and monitor the room in which the answering machine is
located.
Call the answering machine from a separate line. During the OGM, enter your security code.
Press the "7" pad and the unit will monitor the situation for 90 seconds, beep and then stop, if you
want to continue monitoring, immediately press the "7" pad again.
To stop monitoring, press the "9" pad.
NOTE:
Pressing the " " pad will stop all operations and release the line.

REMOTELY SETTING THE UNIT TO ANSWER-ONLY OR ANSER/RECORD MODE
Call the answering machine from a separate line. During the OGM, enter your security code.
Press the "8" pad to cycle through the modes (Answer/Record, Answer-Only and Answer-off). After
pressing the "8" pad, you will hear the respective OGM. If you only hear a long beep, then the unit
is set to the Answer-Off mode.
Press the "9" pad when finished.
END CALL:
Press the "" pad to stop remote operation and end the call.

REMOTE OPERATION

REMOTE OPERATION
REMOTE OPERATION
EN
5