DragonTouch DT40 Manual Del Usuario página 7

4. Charging Stand -【UPDATE】
New version charging stand design. We listened to our customers' feedback about
charging ports being prone to damage, so we`ve add the charging stand for improved
durability and reliability.
① During power OFF, when charging stand`s adapter is plugged in, put your Monitor Unit
into the charging slot, the Charging LED indicator will illuminate red to indicate charging,
then the Charging LED indicator turn off to indicate that the battery is fully charged.
② During power ON, when charging stand`s adapter is plugged in, put your Monitor Unit
into the charging slot, the battery icon on the screen`s top right corner will show that
the battery is charging. The Charging LED Indicator will also illuminate red to indicate
charging, then turn green to indicate the battery is fully charged.
Note: You can use the Monitor Unit while it is being charged.
08
5. Pairing
The Camera Unit is paired to your Monitor Unit. You do not need to pair it again unless
the Camera Unit loses its link with the Monitor Unit. To re-pair your Camera Unit, or pair
to a new Camera Unit, follow the procedure below:
① Press the Menu button of the Monitor Unit to enter to the interface.
② Press the "-" Left Button or the "+" Right Button until Cam icon is highlighted.
09