System Requirements; Package Contents; Connecting Tv Elite Xga To Your Computer; Connecting Tv Elite Xga To Your Tv - ADS Technologies TV Elite XGA Guia Del Usuario

System Requirements:

• IBM compatible PC or
MAC (Blue & White G3 or later, G3 Powerbook or later)
• VGA card
• TV or VCR with video inputs (RCA or S-VHS)

Package Contents

• TV Elite XGA unit
• Infra-Red Remote Control
• 6 ft. VGA to 8 pin DIN connector (VGA IN Cable)
• 9 ft. RCA to RCA (Composite) video cable
• 9 ft. S-VHS to S-VHS (Y/C) 4 pin DIN video cable
• 9 ft. Audio cable - 3.5 mm stereo jack w/Y split female 3.5mm to
Left (Red)+ Right (White) RCA jacks
• Wall transformer Power Supply

Connecting TV Elite XGA to your computer

1. Disconnect the Monitor cable from your computer graphics card.
2. Connect your Monitor cable to the VGA output on the TV Elite XGA
3. Use the 8 pin DIN to VGA IN Cable and connect the VGA end to your
computer graphics card and the 8 Pin DIN to the VGA IN on the
TV Elite XGA.
4. Plug in the power supply and connect the Power Jack on
TV Elite XGA.

Connecting TV Elite XGA to your TV

1. Connect either the RCA or S-VHS cable between the TV Elite XGA
and the matching Video input jack on your TV.
recommended for use whenever possible. S-VHS connections
provide improved image quality over RCA video connections.
2. Disconnect your computer speakers from your sound card Speaker
Jack.
3. Connect the Audio Cable 3.5mm male jack to the speaker jack on
your sound card.
4. Connect your speaker cable to the female 3.5mm Y connection on
the Audio cable.
TV Elite XGA
User's Guide
6
The S-VHS cable is