Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
more than one tool, add the nameplate amperes and use the sum to determine the required minimum wire size.
Guidelines for Using Extension Cords
• If you are using an extension cord outdoors, be sure it is marked with the suffix "W-A" ("W" in Canada) to
indicate that it is acceptable for outdoor use.
• Be sure your extension cord is properly wired and in good electrical condition. Always replace a damaged
extension cord or have it repaired by a qualified person before using it.
• Protect your extension cords from sharp objects, excessive heat, and damp or wet areas.
Recommended Minimum Wire Gauge for Extension Cords (120 Volt)
Nameplate
Extension Cord Length
Amperes
25 Feet
(At Full Load)
0–2.0
18
2.1–3.4
18
3.5–5.0
18
5.1–7.0
18
7.1–12.0
18
12.1–16.0
14
16.1–20.0
12
SPECIFIC SAFETY rULES FOr COrDLESS STAPLErS/
NAILErS
WArNING:
(GAINED FrOM rEPEATED USE) rEPLACE STrICT ADHErENCE TO PrODUCT SAFETY
rULES. If you use this tool unsafe or incorrectly, you can suffer serious personal injury!
WArNING:
operation where cutting tools may contact hidden wiring or its own cord. Contact with a
"live" wire will make exposed metal parts of the tool "live" and shock the operator!
Always wear safety glasses or goggles.
•
glasses.
Wear hearing protection during extended periods of operation
•
will reduce the risk of serious personal injury.
Always assume that the tool contains fasteners
•
result in unexpected firing of fasteners and personal injury.
Do not point the tool towards yourself or anyone nearby.
•
discharge the fastener causing an injury.
Do not actuate the tool unless the tool is placed firmly against the
•
workpiece.
If the tool is not in contact with the workpiece, the fastener may be deflected away from your
target.
remove the battery from the tool if the fastener jams
•
fastener, the stapler may be accidentally activated if the battery is still inserted.
Use caution while removing a jammed fastener
•
compression and the fastener may be forcefully discharged causing personal injury.
Do not use this stapler for fastening electrical cables.
•
cable installation and may damage the insulation, thereby causing electric shock or fire hazards.
Always disconnect the battery pack from tool
•
position before any assembly, adjustments or changing of accessories. following this instruction will reduce
the risk of serious personal injury.
Do not place battery tools or their batteries near fire or heat.
•
risk of explosion and possibly personal injury.
50 Feet
75 Feet
18
18
18
16
14
12
10
DO NOT LET COMFOrT Or FAMILIArITY WITH THE PrODUCT
Hold the tool by insulated gripping surfaces when performing an
100 Feet
18
18
18
16
16
14
14
12
12
10
10
10
8
8
Normal prescription eye or sunglasses are not safety
. Careless handling of the stapler can
. The mechanism may be under
or place the switch in the locked or off
150 Feet
200 Feet
16
16
14
14
12
12
12
10
8
8
8
6
6
6
. following this rule
Unexpected triggering can
. While removing a jammed
It is not designed for electric
This will reduce the
5
Publicidad
Tabla de contenido
