Klarfit 10032654 Montaje página 12

EN
12
• Use long screw (5) and PVC washer (4) to assemble (B) & (C).
• Before tighten up, place a large PVC washer (3) between tubes (B) & (C).
Assemble iron tube A to tube B (already assembled arched tube C).
Use long screw (5) and a small PVC washer (4) to assemble (B) & (C). Before
tighten up, place a large PVC washer (3) between tubes (B) & (C). Both sides
step is the same.
Note: Do not entirely tighten up immediately. Or the other three pieces
could not be assembled also the heights and balance would be influenced.
3
4